Carving Magazine Online Forum

by **Nancy Goff** » Wed Sep 19, 2007 7:44 pm

I'm not even taking photos :oops:

I'm working on another witch ..... they're easier than Santas. (no nasty comments, Dave) She's riding a broom - waving to the world.

What are you working on?

by **mikeg** » Thu Sep 20, 2007 7:18 am

I'm working on ornaments for an exchange I signed up for.

mikeg

by **Kenny_S** » Thu Sep 20, 2007 8:15 am

I am working on a Santa. I bought a blank at a little carving shop in Osage beack at theLake of the Ozarks. The guy was selling all of the blanks and roughouts he had on hand and getting out of the Business of blanks and roughouts. It is 4 x 5 x 14 inchs. no pictures but sure I can pull it off. Besides, If I don't, I have wasted $10 before on less worthy things. LOL.
In my mind, I think I know what to do b ut then, sometimes My little bride doesn't think I have a mind.

Best to all and God Bless
Kenny

by **Claude** » Thu Sep 20, 2007 9:35 am

Rugby players for a father and son in the UK. The father's is a caricature, and the son's is realistic. Waiting for the sealer to finish evaporating so I can paint.

Claude

by **arnie** » Fri Sep 21, 2007 6:47 pm

I bought my wife a broom a few years ago but she could never remember how to start it. arnie

by **SLATHER** » Fri Sep 21, 2007 7:31 pm

Working on two Moose , moose's, moossey? bulls fighting with a timber wolf. Will be about 15" x 12" x 9' high , one is in the hair burning stage , other is just starting finish carving . Wolf is still roaming around in my mind some where, can't seem to get him to strike a pose that I want to use. Does anyone else have this problem??
Al

by **cwhillock** » Sat Sep 22, 2007 12:10 am

I am working on:
- A sign for a Pizza Restaurant
- A Santa figure with a local club
- A Scotty Dog (club project)
- And a 3ft x 6ft log that sits on my back patio (I am working on gettin' to it) hopefully a bear

Chris

by **hi ho sliver** » Sat Sep 22, 2007 8:32 am

SLATHER wrote:Working on two Moose , moose's, moossey? bulls fighting with a timber wolf. Will be about 15" x 12" x 9' high , one is in the hair burning stage , other is just starting finish carving . Wolf is still roaming around in my mind some where, can't seem to get him to strike a pose that I want to use. Does anyone else have this problem??
Al

"Meese" ?

by **SLATHER** » Sat Sep 22, 2007 10:04 am

Thanks Dave , I forgot that one , I was going to put "swamp donkey " but did'nt think anyone that wasnt a bush pilot would know what that was !!

AL

by **CarverRog** » Sun Sep 30, 2007 3:25 am

I'm making a new set of cabinets and trimwork for my carving room. I almost forgot, ornaments for the exchange this year.

by **Nancy Goff** » Mon Oct 01, 2007 8:39 pm

CarverRob ~ Cabinets!? Trimwork!? Good grief... You show off.
My carving table is an ancient closet door lifted from a ~blush blush~ trash pile in Air Force housing in the 1970s ... mounted on folding metal legs we bought from Sears for $11. I bought some scrap Formica to cover it in the late '80s.

by **SLATHER** » Tue Oct 02, 2007 3:22 am

You have come up with a perfect clone of my ex mother in law . nice job Nancy, is this one headed to a gallery also ?

Al

by **CarverRog** » Tue Oct 02, 2007 3:57 am

Very nice carving Nancy! Just the right season for this to come out.

Nancy, it's not what you have but how you use what you have and by the looks of it you're doing just fine!!!! :wink:

by **susieq** » Wed Oct 03, 2007 4:56 pm

Nancy!
What a fun piece!! She is wonderful...but then everything you do is wonderful.

by **Nancy Goff** » Wed Oct 03, 2007 8:02 pm

Thank you nice people -- Susie and CarverRog (Al -- we never use dirty words like "mother-in-law" on-line. Please remember that in the future, OK? :wink:

) I LIKE witches.

Carving Magazine Online Forum

I'm stumbling along

I'm stumbling along

Who is online